Products

Polurea Coatings

Product NameDescriptionDownload Link
Nukote STNukote ST is the industry standard multipurpose Polyurea developed for a wide range of applications in the mining, marine, oil and gas, and infrastructure markets. Nukote ST displays good properties for chemical resistance, moisture permeability resistance, elongation, tensile strength, thermal stability and UV resistance. Nukote ST can be textured easily for anti-skid purposes. Nukote ST exhibits excellent adhesion to most substrates with correct surface preparation and in many cases can be applied without requiring a primer. Nukote ST performs exceptionally well in anticorrosion, chemical resistance, abrasion resistance and waterproofing applications on steel, concrete, and many other substrates. As a 100% solids, pure polyurea, Nukote ST significantly reduces the moisture problems that commonly cause pin holing and blistering in most polyurethane or polyurethane-hybrid systems.
Nukote HARNukote HAR is the premium pure Polyurea available for industrial applications in severe and demanding applications that require very high abrasion resistance, in combination with hydrolytic stability, good impact as well as tear resistance. Nukote HAR is a two-component, 100% solids, pure Polyurea that significantly outperforms elastomer traditionally used particularly in Mining and in industrial applications which requires very high abrasion in dry as well as wet conditions for lining the plant, conveyors, vehicle, Screens, processing vessels and transmission lines. Nukote HAR is a unique high tensile and tear resistance, rapid curing, 100% solids, flexible, two component spray elastomer that can can be applied at temperatures ranging from -30 °C to 150 °C. This aromatic Polyurea Elastomer displays good chemical resistance, thermal stability and UV resistance. Nukote HAR is suitable for application on steel, cement, GRP, FRP and other substrates in combination with suitable primer.
Nukote XT PlusNukote XT Plus is the premium pure Polyurea available for industrial applications requiring a higher resistance to chemicals, especially acids and alkalis. Nukote XT Plus is a two-component, 100% solids, flexible hybrid polyurea which eliminates the cracking problems that plague rigid coatings applied to substrate than move, such as concrete bunds. Nukote XT Plus is suitable for immersion in up to 50% sulphuric acid and concentrated caustic. Nukote XT Plus is suitable for application on steel, cement, GRP, FRP and other substrates in combination with correct surface preparation, which may include using a suitable primer.
Nukote CGNukote CG is a construction grade hybrid polyurea formulated to provide excellent performance for very cost sensitive projects. This is a 100% solids, flexible, aromatic, two component spray hybrid polyurea exhibited good flexibility, waterproofing, abrasion and chemical resistance and can be applied to a range of surfaces with the correct surface preparation.
NAUS FireStop FSPNAUS FireStop FSP is a fire retarded, two component, rapid curing modified polyurea designed for application on wood, concrete, fibreglass, steel or other substrates where a high level of fire retardance is required. This is a 100% solids, flexible, aromatic, two component spray polyurethane polyurea that can be applied to suitably prepared surfaces. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature, allowing application in most temperatures. NAUS FireStop FSP is used to prevent or control flame spread and substrate damage during a fire. The product can be specified as a top coat in conjunction with other NAUS products in monolithic compositions.
Nukote HCRNukote HCR a fast set, high end, rapid curing modified polyurea designed for use in application on concrete or steel or other substrates exposed to hydro carbon solvents. It is 100% solids, flexible, aromatic; two components new generation spray polyurethane polyurea that can be applied to suitably prepare concrete and metal surfaces. It’s extremely fast gel time makes it suitable for applications down to -30°C. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures. Nukote HCR is suitable for primary and secondary containment and ideally suited for tank farms and fuel storage yards in primary as well a secondary containment. The product is commonly specified as a stand alone or in conjunction with other Nukote products in monolithic composites.
Nukote HTNCS has designed Nukote HT as the premium pure Polyurea available for industrial applications, especially those that require slightly higher temperature resistance and higher tensile properties. Nukote HT is a two- component, 100% solids; pure Polyurea that significantly outperforms coatings traditionally used in transmission lines and industrial applications and recommended for use with Cathodic protection systems. Nukote HT has been tested from the Alaska’s frozen tundra to Indonesia’s tropical jungle and everywhere in between. It can be applied at temperatures ranging from -30 °C to 150 °C. This aromatic Polyurea Elastomer displays good chemical resistance, thermal stability and UV resistance. Nukote HT is also specifically designed for application on NCS automated pipe lathes on steel, cement, GRP, FRP and other substrates in combination with suitable primer.
Nukote HTDNukote HTD is the premium pure Polyurea available for industrial applications, especially those that require higher hardness, slightly higher temperature and higher tensile properties. Nukote HTD is a two-component, 100% solids; pure Polyurea that significantly outperforms coatings traditionally used in transmission lines and industrial applications and recommended for use with Cathodic protection systems. It can be applied at temperatures ranging from -30 °C to 150 °C. This aromatic Polyurea Elastomer displays good chemical resistance, thermal stability and UV resistance. Nukote HTD is also specifically designed for application on NCS automated pipe lathes on steel, cement, GRP, FRP and other substrates in combination with suitable primer.
Nukote LPNukote LP is a fast set, rapid curing modified polyurea designed for use in application on concrete, steel or other substrates that do not require the full physical properties of other specially formulated polyurea. Nukote LP is designed for general-purpose use, and performs well in anticorrosion and waterproofing applications on steel, concrete, and many other substrates. Nukote LP can be applied at temperatures ranging from –30°C to 120°C. This aromatic polyurea elastomer displays good chemical resistance, thermal stability and good UV resistance. Nukote LP can be textured easily for anti-skid purposes. The product shows very good moisture permeation resistance and is less sensitive to moisture.

Concrete Treatment

Product NameDescriptionDownload Link
Nukote HPTNCSI’s experience in the international industrial coatings industry is world renowned and unrivalled by any other manufacturer. Our range of primers and concrete treatments complements our unique advanced polyurea polymer coatings so that complete solutions are available for nearly all coating applications
NukoteHLTNCSI’s experience in the international industrial coatings industry is world renowned and unrivalled by any other manufacturer. Our range of primers and concrete treatments complements our unique advanced polyurea polymer coatings so that complete solutions are available for nearly all coating applications

Specialty

Product NameDescriptionDownload Link
Nukote CHEMSHIELDNukote Chemshield is a plural component system composed of metals and ceramics in a polymeric binder, providing excellent performance in corrosive, chemical and abrasive environments, at ambient or elevated temperatures. This product is designed for industrial use at elevated temperatures and will maintain its physical properties under continued exposure at high constant temperature both in exposed as well as immersion conditions. Nukote Chemshield is resistant to many solvent, chemicals including high levels of Hydrochloric Acid, Sulphuric Acid, Alkalies, Mineral Spirits, Cutting oil, Sulphur fumes, Seawater, in ambient or elevated temperatures. Chemshield is also suitable in cryogenic applications.
Nukote Chemshield FCNukote Chemshield FC is a plural component system composed of a proprietary polymeric binder, providing excellent performance in highly corrosive, chemical and abrasive environments, at ambient or elevated temperatures. This product is designed for industrial use at elevated temperatures and will maintain its physical properties under continued exposure at high constant temperature both in exposed as well as immersion conditions. Nukote Chemshield FC is resistant to many solvents, hydrocarbons, steam, chemicals including high levels of Hydrochloric Acid, Sulphuric Acid, Alkalis, Mineral Spirits, Cutting oil, Sulphur fumes, Seawater, in ambient or elevated temperatures. Nukote Chemshield FC has good bond to rubber, metals as well as concrete and also suitable in cryogenic applications. Chemshield FC is excellent for lining vessels in direct constant contact with Hydrochloric acid at elevated temperature and acid fumes.
Nukote Chemshield TGNukote Chemshield TG is a plural component system composed of a proprietary polymeric binder, providing excellent performance in highly corrosive, chemical and abrasive environments, at ambient or elevated temperatures. This product is designed for industrial use at elevated temperatures and will maintain its physical properties under continued exposure at high constant temperature both in exposed as well as immersion conditions. Nukote Chemshield TG is resistant to many solvents, hydrocarbons, steam, chemicals including high levels of Hydrochloric Acid, Sulphuric Acid, Alkalis, Mineral Spirits, Cutting oil, Sulphur fumes, Seawater, in ambient or elevated temperatures. Nukote Chemshield TG has good bond to rubber, metals as well as concrete and also suitable in cryogenic applications. Chemshield TG is excellent for lining vessels in direct constant contact with Hydrochloric acid at elevated temperature and acid fumes.